REDMOL 100 Pieces Tile Leveling System Tile levelers Set 200 Pieces 2 mm Tile Spacers, Tile Wedges Lifter 2 Special Wrenches Replaceable Pin Reusable Tile Installation Tool Kit for Tile Laying

REDMOL 100 Pieces Tile Leveling System Tile levelers Set 200 Pieces 2 mm Tile Spacers, Tile Wedges Lifter 2 Special Wrenches Replaceable Pin Reusable Tile Installation Tool Kit for Tile Laying


Price: [price_with_discount]
(as of [price_update_date] – Details)


[ad_1]
Steps：

  1. When laying and pasting tiles, the brick seam shall be kept at 2-6 mm Set the thickness of the tile that the regulator will be inserted into, and insert T-type metal needles along the brick joints,
  2. then rotate 180° to lock it in the bottom of the two bricks Squeeze the adjusting cover downward by hand or with the special wrench to make the level of the two bricks consistent After the construction,
  3. five hours later, when cement or tile adhesive is not completely dry, you can loosen the adjusting cap to the opposite direction,
  4. 180° rotate again, and let the T needle along the crack out Before tightening,
  5. it is recommended to rotate the T-pin left and right several times to make room for the surrounding cement or tile glue so that the regulator can be more easily removed

What’s in the package:

  • 100pcs tile leveler(assembled)
  • 200pcs tile spacer
  • 2 wrenches

Note:

  • When laying and pasting tiles, the brick seam shall be kept at 2-6 mm.
  • When leveling the steel needle rotates left and right to clean the surrounding cement. It must be taken off within 4-6 hours;
  • When removing, you can first press the needle down to reduce the frictional resistance between it and the tile; Do not fill up the cracks in the bricks with cement, otherwise, if the steel needle is taken off too late, the cement will dry and the steel needle cannot be pulled out.

【Simple & time saving】:The new system does not require any tools and has a special wrench. Use a wrench to easily fix or disassemble, reducing the grinding and polishing time after using this tile leveler. Prevent the tiles from moving during curing. In order to increase the installation speed of the tiles and reduce the fatigue/stress of the installer, to avoid unevenness. It solves the problem of floor cracking and provides a flat ground.
【Installation Tile Tool】The Tile Leveling System helps DIY and Professional tile layers increase the efficiency of laying tiles and obtain a perfect, lippage-free finish.
【Applicable Tiles Specifications】This tile leveling system is suitable for tile gap between 2mm to 6mm, and can be used for 3mm to 17mm thick tiles. It is easy enough to fix or remove with Special wrench.
【Service & Guarantee】We offer 360-Day Money-Back Service for any quality issues. Any dissatisfaction with the purchase within that period will be responded with a refund.

[ad_2]