Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
Self Adhesive Base Floor Heating Mat Large size 30-100 sq.ft. Electric Floor Heating Mat Large size WarmMat The Ceramic Tile Wooden Floor Heating System Floor Heating Cable For House Warming 150W/m² 120V
150W/sqm output – This range is used for simple floor warming within living areas where primary heating is not essential and there are other sources of heating available such as radiators. This can also be used as a primary heat source in some circumstances when used in conjunction with flooring insulation.
This heating mat comes with self-adhesive on the back, so it’s easy to install.
Teflo-n inner insulated, can enduring 200C degrees.
All the size ——>>
Product parameter
Cable Construction：Two conductor
Rated Voltage：120V
Output：12W/ft2（130W/m²）
Cable spacing：76.2mm
Cable Diameter：1/8"（3.2mm）
Conductor Insulation：Fluoropolymer
Max Ambient Temp：85℉(30℃)
Min Installation Temp：40℉(5℃)
cold le-ad：10ft （3m） length
Conductor Insulation；Fluoropolymer
Outer insulation:Fluoropolymer or pvc
What is underfloor heating?
Underfloor heating is a highly and economic way of adding warm comfort to your home,These heating systems produce a maintained even heat distribution wherever it is installed within the home,this is coupled with low installation and running costs,underfloor heating is an enconomical way of creating that perfect ambient temperature.
Underfloor heating system can be used both as a central heating unit and as a supplemental system.it is always our recommendation to partner your heating system with insulation；this lowers heat up times significantly and further increases efficiency.
Basic installation steps:
All of our kits come complete with clear and informative installation instruction，but as a quick guide to what is involved with installing your underfloor heating system we have prepared these basic steps.
step1:Draw a plan of how you intend to fit your ma
2.UL LISTED for USA and Canada. Fluoropolymer (One of the most heavy duty plastic material) as the insulation. Can be used for wet application, but not for installation in pool and spa areas, nor outdoor use. 25 years limited war-ranty for the heating mesh. The limited w-arranty is valid based on correct installation methods and completion of all test requirements.
3.Mat Voltage: 120V, Output: 12 Watts/Sqft. The yellow heating element cannot be cut. The mesh material can be cut to make turns and angles to heat just about any shaped area. A more detailed installation process is outlined in the instructions.
Ultra-thin &durableheating element (Only 1/8″ thick), Pre- spaced wire attached to a tough fiberglass mesh backing, Cable cannot be cut, but the matting can be, to allow you to turn a corner or reverse direction.
4.Fully self-adhesive underlay for ease of laying along with complete and comprehensive installation instructions for your convenience. used in conjunction with the thermostat controller. Easy install to your shower room, kitchen room, wet room, living room, greenhouse and so on.
[ad_2]